Installation

11
D
A
B
C
B
C
A
E
Wall Wall
90° DOOR OPENING115° DOOR OPENING
(FULL ROTATION)
For 90° door swing a hinge limiting pin is supplied with
your refrigerator. This pin fits in the boreholes of the top
hinge (referto Z).
WARNING!
Before opening doors to the product, ensure the
product is on its base packer and the polystyrene
stability blocks are still in place. Failure to follow these
instructions could lead to serious injury or death.
1
Open door to 90°.
2
Align the hinge limiting pin vertically with the bore hole.
3
Use a hammer to drive the pin through the bore hole.
Z
8 DOOR OPENING ROTATION
RS3680/RS3684
DOOR CLEARANCE DIMENSIONS inches (mm)
A
Depth of door (widest opening) measured from front of door 187/8” (480)
B
Depth of drawer (open) measured from front of drawer, including handle 153/4” (400)
C
Depth of drawer (open) measured from front of drawer, excluding handle 143/16” (360)
D
Minimum door clearance* to adjacent wall (115° – full internal access) 123/8” (315)
E
Minimum door clearance* to adjacent wall (90° – reduced internal access) 45/16” (110)
* Measured from front cabinetry edge. An additional 3/4’’ (20mm) is required when using RD3680C and RD3684C door panel sets.