Frameless Installation Guide

32
@1 ATTACH SIDE TRIM BRACKETS
IMPORTANT!
Before installing your appliance, ensure the dimensions of the finished enclosure are correct for your appliance following the‘Product and cavity dimensions’ sections.
Frameless cabinetry installation
(opened cabinetry doors)
1 Break off the datum lip to each side
trim bracket and discard.
Repeat for all side trim brackets.
Discard
2 Position three side trim brackets on each
side (refer to A for bracket locations).
Open the appliance doors. Measure
2” (50mm) from the front face of the
appliance (from behind the doors), to the
front of the alcove and accurately mark a
vertical line (refer to B).
Align the bracket edge with the marked line
and using screws x2 (#8 x 16 mush washer)
fix the bracket to the cabinetry x3.
Repeat on the opposite side.
IMPORTANT!
Inaccurate positioning of bracket can result
in inability to fit side trim or gaps between
side trim and appliance.
~
69” (1753mm)
~
40” (1016mm)
~
10” (254mm)
2” (50mm)
A
2” (50mm)
B
Front of cabinet