Frameless Installation Guide

29
1 Carefully open the refrigerator French doors
to attach fixing brackets. On the LH side, place
a fixing bracket over the side of the appliance
and secure mid-way with screws x2 (M5 x 8
countersunk Phillips screws) (refer to A).
2 Secure the center of each fixing bracket to the
side of the finished enclosure with screws x2
located at B (#8 x 19 twin thread screws).
Repeat this process for the remaining brackets.
3 Remove the screw located at C (#8 x 19 twin
thread screw).
Repeat this process on the opposite side.
4 Slide screw cover in between the fixing bracket
and the side bracket on the appliance x1.
Repeat this process for the remaining screw
covers.
5 Fix screw cover by tightening screws x2
(M5x8 countersunk Phillips screws).
Repeat this process for the remaining screw.
A
B
C
!8 ATTACH FIXING BRACKETS