Installation Guide

40
0
Front of
cabinet
C
~ 10" (254mm)
~ 40" (1016mm)
~ 69" (1753mm)
2" (50mm)
2" (50mm)
D
4
Position three side trim brackets on one side trim.
Refer to (B) for bracket locations.
5
Open the French doors. Measure 2" (50mm) from the front
of cabinet (from behind the doors), to the front of the alcove
and accurately mark a vertical line (C).
6
Align the bracket edge with the marked line and fix the
bracket to the cabinetry with #8x16 mush washer screws (D).
Repeat on the opposite side.
IMPORTANT!
Inaccurate positioning of bracket can result in inability to
fit side trim or gaps between side trim and refrigerator.
B
1
Break off the datum lip to each side trim bracket and discard.
Repeat for all side trim brackets.
Discard
For 80" (2032mm) cavity
installationonly
2
Measure 4" (102mm) from the top
ofthe side trim with a square ruler
and mark a cutting line (A).
3
Cut along the line using a fine
tooth hacksaw to a length of
76"(1930mm) (B).
IMPORTANT!

Ensure the cut is straight and square
as this is an exposed surface.

Ensure the plastic part does not
bend as this can causevisual
stressmarks.
Repeat for the remaining sidetrim.
A
Plastic
Aluminum
B
short lip
Internal box
D
Cabinet side
trim install kit
Side trim bracket
(6)
#8 x 16 Mush Washer Twin Thread Philips Screw
#8 x 16
Mush Washer
Twin Thread
Philips Screw
#8x16 mush washer screw
(12)
External box
Cabinet side trim
(2)
Tools
Hacksaw
Cross-head screwdriver
Pencil
@6CABINET TRIMS INSTALLATION—[B] FIXED SCREW METHOD