Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components
- 3 Tools
- 4 Appliance and cavity dimensions
- 5 Cabinetry options
- 6 Stainless steel door panel and toe kick dimensions
- 7 Custom door panel and toe kick dimensions
- 8 Custom door panel installation dimensions
- 9 Custom door panel installation template
- 10 Door clearance
- 11 Electrical and plumbing
- 12 Before installation
- 13 Cavity preparation
- 14 Water and power supply connection
- 15 Top trim installation
- 17 Positioning into cabinetry
- 18 Aligning inside cabinetry
- 19 Door panel installation - stainless steel
- 20 Door panel installation - custom
- 21 Fixing to cabinetry
- 22 Water filter installation
- 23 Toe kick installation
- 24 Door and door trims installation
- 25 Cabinet trims installation — [A] Flexible spring clip method
- 26 Cabinet trims installation — [B] Fixed screw method
- 27 Final checklist
- 1 Consignes de sécurité et mises en garde
- 2 Pièces
- 3 Outils
- 4 Dimensions de l’appareil et de la cavité
- 5 Options d’armoires
- 6 Dimensions de panneau de porte et de plinthe en acier inoxydable
- 7 Dimensions de panneau de porte et de plinthe sur mesure
- 8 Dimensions d’installation de panneau de porte sur mesure
- 9 Gabarit D'installation de panneau de porte sur mesure
- 10 Dégagement de la porte
- 11 Raccordement électrique et plomberie
- 12 Avant l’installation
- 13 Préparation de la cavité
- 14 Alimentation en eau et alimentation électrique
- 15 Installation de la garniture supérieure
- 17 Positionnement dans les armoires
- 18 Alignement dans les armoires
- 19 Installation de panneau de porte — En acier inoxydable
- 20 Installation de panneau de porte — Sur mesure
- 21 Fixation aux armoires
- 22 Installation du filtre à eau
- 23 Installation de la plinthe
- 24 Installation des garnitures de porte et tiroir
- 25 Installation des garnitures de bâti — [A] Méthode avec clip de fixation flexible
- 26 Installation des garnitures de bâti — [B] Méthode avec vis fixée
- 27 Liste de vérification
37
Attach the door side trims
3
Install the side trims by inserting into the panel gaps on each side of the
door(s) (C). Align the trim to the top of the door and press evenly into the
panel gap until fully seated (D).
Attach the covers
1
If applicable, remove any remaining protective
film on your door panels.
2
Open both doors. Attach the top covers (A)
firmly over the top studs, and the side covers
(B) to the side brackets.
A
B
F
Attach the drawer top and side trims
4
Peel off two dual adhesive tabs and press them
together to form a pair (E). Remove the adhesive
backing on one side only.
5
Press firmly to the underside of the drawer top trim
inthe indicated locations (F).
4
Remove the remaining adhesive backing from thedual adhesive tabs.
5
Locate the trim against the back surface of the panel and press down
firmly. Ensure the trim is fully seated against the drawer surface (G).
6
Install the side trims by inserting into the panel gaps on each side of the
door(s) (H).
– Make sure the cabinet is centered to prevent the side trims from
interfering with the cabinet.
G
H
Internal box
C
Door/drawer
trim install kit
Dual adhesive tabs
(10)
Side cover
(4)
Top cover
(2)
External box
Door side trim
(2)
Drawer side trim
(2)
Drawer top trim
(1)
@4DOOR AND DOOR TRIMS INSTALLATION
D
C
E