Installation Guide

15
4
Restrain the appliance
tothe cart with straps.
5
Remove the brackets
on the other side of
theappliance.
6
Tilt the appliance backward
onto the cart.
7
Set aside the pallet and
push the cart to the
installation location.
2
Tilt the appliance
slightly to the
opposite side.
3
Insert the hand truck under
the side of the appliance
where the brackets were
removed.
Do NOT insert the hand
truck to the front or back
oftheappliance.
Moving your appliance
1
Remove the brackets from one side of the
appliance. (For single door models, remove
the brackets on the non-hinged side of the
appliance).
Note: Location of brackets depends on the
model of your appliance.
USER GUIDE
NZ AU GB IE HK SG IN US
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
Water fittings and Water filter kits
Installation kit
2
Remove the water fittings and
water filter kits, installation kit,
and miscellaneous items pack
from inside the appliance.
Refer to 'Components list'.
IMPORTANT!

Be careful when unpacking to prevent damage to the surface of your appliance.

Ensure that the appliance is stable to prevent from tipping over when unpacking.

Do not open the doors to prevent the appliance from tipping over.

The appliance is heavy and requires a minimum of 2persons to unpack and install.

Ensure that the feet of the appliance are retracted.

If the appliance is damaged, contact your Fisher & Paykel dealer.

Take note of your model and registration numbers located at the lower right side of
theappliance. You will need these to request for servicing or repair of your appliance.
hand truck
!2BEFORE INSTALLATION
Miscellaneous items pack
Checking your appliance
1
Remove accessories box
located at the back panel
ofappliance.
Refer to 'Components list' for
contents of accessories box.
IMPORTANT!
Be aware when removing the
carton that the accessories
box may have dislodged from
the rear of the appliance
during transit.