Installation Guide
Table Of Contents
- Safety and warnings
- Components
- Tools
- Appliance and cavity dimensions
- Cabinetry options
- Stainless steel door panel and toe kick dimensions
- Custom door panel and toe kick dimensions
- Custom door panel installation dimensions
- Custom door panel installation template
- Door clearance
- Electrical and plumbing
- Before installation
- Cavity preparation
- Water and power supply connection
- Top trim installation
- Side brackets installation
- Positioning into cabinetry
- Aligning inside cabinetry
- Door panel installation - stainless steel
- Door panel installation - custom
- Fixing to cabinetry
- Water filter installation
- Toe kick installation
- Door and door trims installation
- Cabinet trims installation — [A] Flexible spring clip method
- Cabinet trims installation — [B] Fixed screw method
- Final checklist
31
Attach the door panels
1
Open the door and loosen the M5x10 cross-head
screws (do not remove) at the sides of the doors (A).
2
Hang the door panel by inserting the M8 studs
through the holes of the hanging bracket (B).
3
Slide the forks of the side brackets onto the
screwsof the door (C).
4
Screw the M8 washer and nut to each stud(D),
and re-tighten the side screws (E) to fix the
door panel (do not fully tighten). This will allow
opening the door without affecting adjustment
of the door panel.
B
D
C
A
E
Tools
FPA spanner
Hex key
Cross-head screwdriver
Powered driver
(optional)
DOOR PANEL INSTALLATION - CUSTOM