Install Guide - Water Filter Replacement

4 FOR INTEGRATED COLUMNS REFRIGERATORS

Installing the new filter

Note: It is not necessary to turn the water supply off when installing the water filter.

Remove the plastic wrapping from the new filter.

Open the water filter hatch to access the filter (A), press the hatch in then pull the hatch down (B).

Return the filter tool to its storage position (H).

IMPORTANT!

After installation, the water filter MUSTbe flushed.

Refer to ‘Flushing thewater filter’ for details.

Using the filter tool, rotate the filter head

clockwise 90° to lock in place (G).

– If the filter will not turn, ensure the filter is

correctly aligned (D & E), to allow the filter

to be pushed firmly into the filter head.

– Ensure the filter is fully rotated 90°

toallow the water to flow.

Align the filter correctly,

ensure the filter handle is

positioned vertically (D) and

the lugs are aligned correctly(E).

Push the filter firmly inside the casing

all the way into the filter head (F).

Pull the filter tool gently to dislodge fromthe

front of the appliance (C).

filter

handle

lugs