Install Guide - Water Filter Replacement

Remove the plastic wrapping from

the new filter.

Pull the filter head towards you (A).

Push the entire filter back into the bracket (E).

IMPORTANT!

After installation, the water filter MUST be flushed.

Refer to ‘Flushing the water filter’ for details.

3 FOR REFRIGERATORS WITH EXTERNAL FILTER

Push the filter firmly all the way into the filter

head then rotate the filter clockwise 90°

until it locks into place (D).

– If the filter will not turn, ensure the

filter is correctly aligned (B), to allow

the filter to be pushed firmly into the

filter head.

– Ensure the filter is fully rotated 90°

toallow the water to flow.

Installing the new filter

Note: It is not necessary to turn the water supply off when installing the water filter.

Align the filter correctly (B).

Insertthefilter into the filter head (C).