Install Guide - Water Filter Replacement

2
Removing the old filter
Note: It is not necessary to turn the water supply off when removing the water filter. It is easier to remove the water filter with the water turned on.
3
Hold the base of the filter firmly and pull
towards you (B).
C
4
Rotate the filter counterclockwise 90°.
Thefiltershould release from the filter head (C),
if it does not, pull the filter toward you.
D
5
Pull out the filter (D) to remove it from the filter head.
Discard the old filter.
– If the filter is difficult to remove, runwater through
the filter by dispensing water.
– A small amount of water will drip after you remove
thefilter. This is normal.
1 Find the filter cover on the back wall, top right
ofyourrefrigerator.
2
Pull the tab (A) at the bottom of the cover towards
you to release. The cover will slide down upon release.
Note: Remove the top shelf if you need more space
while removing the filter.
A
B
2 FOR FREESTANDING REFRIGERATORS
The filter is located internally
at the back top right corner
of the refrigerator.