Installation Guide

39
Attach the covers
1
Open the French doors.
Attach the top covers (A) firmly
over the top studs, and the side
covers (B) to the side brackets.
Attach the door side trims
2
Install the side trims by inserting into the panel gaps on each
side of the door(s) (C). Align the trim to the top of the door
and press evenly into the panel gap until fully seated (D).
C
D
A
B
F
Attach the drawer top and side trims
3
Peel off two dual adhesive tabs and press them together
to form a pair (E). Remove the adhesive backing on one
side only.
4
Press firmly to the underside of the drawer top trim
inthe indicated locations (F).
5
Remove the remaining adhesive backing from the dual adhesive tabs.
6
Locate the trim against the back surface of the panel and press down firmly.
Ensure the trim is fully seated against the drawer surface (G).
7
Install the side trims by inserting into the panel gaps on each side of
the door(s) (H).
– Make sure the cabinet is centered to prevent the side trims
frominterfering with the cabinet.
G
H
Internal box
C
Door/drawer
trim install kit
Dual adhesive tabs
(12)
Top cover
(2)
Side cover
(4)
External box
Door side trim
(2)
Drawer side trim
(2)
Drawer top trim
(1)
@4 COVERS AND TRIMS INSTALLATION
C