Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components
- 3 Tools
- 4 Appliance and cavity dimensions
- 5 Cabinetry options
- 6 Door panel dimensions
- 7 Custom door panel installation dimensions — RS32A72
- 7 Custom door panel installation dimensions — RS36A72
- 8 Custom door panel installation template (RS32A72)
- 8 Custom door panel installation template (RS36A72)
- 9 Door clearance
- 10 Electrical and plumbing
- 11 Before installation
- 12 Cavity preparation
- 13 Water supply connection
- 14 Power supply connection
- 15 Installation preparation
- 16 Top trim installation
- 17 Positioning into cabinetry
- 18 Aligning inside cabinetry
- 19 Door panel installation — stainless steel
- 20 Door panel installation — custom
- 21 Fixing to cabinetry
- 22 Water filter installation
- 23 Toe kick installation
- 24 Covers and trims installation
- 25 Cabinet trims installation — [A] flexible spring clip method
- 26 Cabinet trims installation — [B] fixed screw method
- 27 Final checklist
- 1 Consignes de sécurité et mises en garde
- 2 Pièces
- 3 Outils
- 4 Dimensions de l’appareil et de la cavité
- 5 Options d’armoires
- 6 Dimensions de panneau de porte
- 7 Dimensions d’installation de panneau de porte sur mesure — RS32A72
- 7 dimensions d’installation de panneau de porte sur mesure — RS36A72
- 8 GABARIT D’INSTALLATION DE PANNEAU DE PORTE sur mesure — RS32A72
- 8 GABARIT D’INSTALLATION DE PANNEAU DE PORTE sur mesure — RS36A72
- 9 DÉGAGEMENT DE LA porte
- 10 Raccordement électrique et plomberie
- 11 Avant l’installation
- 12 Préparation de la cavité
- 13 Connexion d'alimentation en eau
- 14 Connexion d'alimentatioN
- 15 préparation de l'installation
- 16 installation de la garniture supérieure
- 17 positionnement dans les armoires
- 18 alignement dans les armoires
- 19 installation de panneau de porte — En acier inoxydable
- 20 Installation de panneau de porte — sur mesure
- 21 Fixation aux armoires
- 22 Installation du filtre à eau
- 23 Installation de la plinthe
- 24 INSTALLATION DES GARNITURES DE PORTE ET TIROIR
- 25 Installation des garnitures de bâti — [A] méthode avec clip de fixation flexible
- 26 Installation des garnitures de bâti — [B] méthode avec vis fixée
- 27 Liste de vérification finale
23
3
Fix the top trim by screwing #12x12 countersunk
screws (D) through the screw holes of the top
trim and hinge brackets.
Internal box
X
Install
fasteners kit
#12x12 Countersunk
cross-head screw
(2)
Tools
Cross-head screwdriver
Powered driver (optional)
Install the top trim
1
Position the top trim on top of the top cover of the
appliance (A).
2
Align the small screw hole of the top trim with the
screw hole of the hinge bracket (B).
– Ensure the front face of the top trim is flush
with the front face of the top cover (C).
Do this step to both right and left hinge brackets.
A
D
Top cover
B
C
Small screw hole
Top trim
Top trim front face
flush with top cover
front face
!6 TOP TRIM INSTALLATION