Installation Guide
25
@0 FINAL CHECKLIST
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer’s Name
Installer’s Signature
Installation Company
Installation Date
TO BE COMPLETED BY THE INSTALLER
All models
Check all parts are installed.
Ensure the product is level.
Ensure the product is securely fastened to the cabinetry with the supplied
anti-tip bracket and fittings.
Ensure the doors/drawer can open and close freely with no resistance from
surrounding cabinetry.
Ensure all internal and external packaging is removed from the appliance
before use.
Ensure change filter icon is enabled. This will remind you when the filter next
needs replacing. Press and hold , and for 4seconds on the internal
control panel.
Ensure a manual ice maker cycle has been forced. Press and hold ,
and for 4seconds on the internal control panel, then close the refrigerator
compartment door. The ice tray will flip twice. Empty the water from the bin,
then dry and replace.
Ensure ice maker is turned on. Press button once on the internal control
panel. This light above the button will illuminate indicating ice maker is on.
Please discard the first 24 hours of ice harvest.
Ice & Water models only
Ensure the water filtration system has been flushed.
To flush the water filtration system
When using your water dispenser for the first time, run the dispenser pad until water
dispenses, this will displace trapped air in the water tank and filter system. This will take
at least 2minutes. Once water has dispensed, rest the dispenser pad for 2minutes.
Dispense and discard 4qt (4L) of water, then rest the dispenser pad for a further
2minutes, repeat process.
Failure to do this will result in excessive dripping from your water dispenser.
IMPORTANT!
DO NOT continuously dispense water for longer than 2minutes at a time.