Installation Guide

ManualsBrandsFisher & Paykel ManualsFrench Door RefrigeratorsRS36A72U1

The assembly of Fisher & Paykel door panel sets (EZKleen stainless steel door panels) and custom door panel sets are outlined below.

For Fisher & Paykel door panel sets, only remove the protective film for handle installation. This will protect the finish of the door panels until installation is complete.

!4 ASSEMBLE DOOR PANEL SET

1 Mounting handle (Refer to A)

For Fisher & Paykel door panel sets, remove

theplastic plugs from the handle holes x4.

Align the handle to the holes and secure

withscrew handle x4 (M5 x 25 pan head

socketscrews).

For custom panels, ensure handle is secured

2⁄” (65 mm) from the inner edge of the panel

to the center – this will avoid interference with

bracket installation.

2 Hanging bracket (Refer to B)

For Fisher & Paykel door panel sets, align the

bracket to the holes and secure with screws x4

(M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with screws x4

(#8 x 16 Mush washer screws).

3 Side brackets and straps (Refer to C)

For Fisher & Paykel door panel sets,

align bracket and strap to the holes

on the side of the panel and secure

with screws x2 (M5 x 14 Mush

Phillips SS).

For custom panels,

secure bracket with

screws x2 (#8 x 16

Mush washer screws).

Repeat this process

for all brackets and

straps, and remaining

French door panel.

French door panels Drawer door panel

4 Mounting handle (Refer to D)

For Fisher & Paykel door panel sets,

remove the plastic plugs from the handle

holes x4. Align the handle to the holes and

secure with screw handle x4 (M5 x25 pan

head socket screws).

For custom panels, ensure handle screw

heads are counter sunk into the back

of the panel to avoid interference with

hanging bracket.

5 Hanging bracket (Refer to E)

For Fisher & Paykel door panel sets, align

the bracket to the holes and secure with

screws x6 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with

screws x6 (#8 x 16 Mush washer screws).

6 Side brackets and straps (Refer to F)

For Fisher & Paykel door panel sets,

align bracket and strap to the holes on

the side of the panel and secure with

screws x2 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with

screws x2 (#8 x 16 Mush washer screws).

Repeat this process for all brackets

andstraps.