Manual
20
OPERATING INSTRUCTIONS
Before you start using the Ice & Water or automatic ice
Ensure your ice and water system is correctly installed by following the installation guide
supplied with your appliance.
Check your refrigerator is switched on.
Allow at least 2hours for your refrigerator to cool before use.
Complete all the flushing steps detailed in the this user guide to ensure optimum
performance of your water filter.
Water dispenser (Ice & Water model only)
Flushing out the water filtration system
Press the water dispenser pad to dispense 1 gal (4L) of water.
– There may be carbon residue dispensed together with
water. This is not harmful, and normal during flushing
process.
Wait for 4 minutes before dispensing again.
Dispense another 1 gal (4L) of water. Your water dispenser is
now ready for use.
Water will continue to drip from the dispenser for a few more
days after installation to clear remaining trapped air in the
dispenser.
Dispensing
Your water dispenser is designed for one-handed operation.
To dispense water, gently press the dispensing pad with a glass or container.
To stop the flow of water, simply pull your glass away from the dispensing pad.
Pressing hard against the dispensing pad will not increase the flow or dispense
morewater.
IMPORTANT!
To avoid damage to property or personal injury do not put hands, fingers or objects
up the dispenser opening.
Dispenser lock
The dispenser lock is located on the external display and can
be activated to prevent water from being dispensed. This is
useful when you are cleaning the external display or when
there are small children around.
To activate dispenser lock, press for 4seconds. The light
above will illuminate.
When the dispenser pad is pressed, several beeps will sound to
alert the user that water cannot be dispensed.
To deactivate dispenser lock and dispense water, press for
4seconds. The LED above
will not illuminate.
Water dispenser
Dispenser lock