Installation Guide

24
!9 ATTACH COVERS AND KICKSTRIPS
1 To stabilize the product, lower the
front feet. Turn clockwise to lower feet.
Repeat on the opposite side.
2 Kickstrip filter
Remove filter from inside the product.
Fit the filter onto the rails and push to
the rear until it clips securely.
3 Kickstrip grille
Align clips on the back of the grille with
openings on front face of plinths. Push grille
firmly onto product until it clips securely.
4 For Fisher & Paykel door panel sets,
remove any remaining protective film
from all door panels.
6 Open the refrigerator French doors to
conceal the side screws using side covers.
Firmly push side cover over side screws.
Repeat this process for the freezer drawer.
5 Open the refrigerator French doors to
conceal the outer top studs using top covers.
Firmly push top cover over top door studs.
Repeat this process for the freezer drawer.