Installation Guide

22
!6 HANGING NON-WATER DISPENSING DOOR PANELS
2 All door panels have full axis
adjustment to ensure they are
flush with adjacent walls, or until
satisfactory. To adjust the height of
each panel turn clockwise to raise stud
or counter-clockwise to lower stud.
3 Once satisfied with all door panels,
secure M8 studs with M8 washer
and M8 nut. The top of the stud
must remain below the top face of
the door panel.
4 Secure side bracket forks by
tightening side screws.
Repeat this process for all door
panels. Ensure all door panels are
flush with adjacent walls, adjust
accordingly or until satisfactory.
1 Hang all door panels onto M8 studs
and align the side bracket forks
onto the refrigerator door.
Ensure the forks are positioned
around the body of the side screw
(M5 x 10 pan head Phillips screw).