Manual

24
CLEANING CARE
DETAIL A
SCALE 1 : 1
DETAIL D
SCALE 2 : 1
IF TOEKICK IS HIGHER THAN 4" USE SIDE CUTTER TO 1.
CUT UNREQUIRED VANES FROM DOTTOM
DRILL HOLES THROUGH DIMPLES
2.
USE PROVIDED SCREWS TO FIX GRILL TO 3.
MATCHING HOLES ON PLASTIC PARTS
Replacing top toe kick grille
D
DETAIL A
SCALE 1 : 1
DETAIL D
SCALE 2 : 1
IF TOEKICK IS HIGHER THAN 4" USE SIDE CUTTER TO 1.
CUT UNREQUIRED VANES FROM DOTTOM
DRILL HOLES THROUGH DIMPLES
2.
USE PROVIDED SCREWS TO FIX GRILL TO 3.
MATCHING HOLES ON PLASTIC PARTS
DETAIL A
SCALE 1 : 1
DETAIL D
SCALE 2 : 1
IF TOEKICK IS HIGHER THAN 4" USE SIDE CUTTER TO 1.
CUT UNREQUIRED VANES FROM DOTTOM
DRILL HOLES THROUGH DIMPLES
2.
USE PROVIDED SCREWS TO FIX GRILL TO 3.
MATCHING HOLES ON PLASTIC PARTS
E
Replacing air flow divider
DETAIL A
SCALE 1 : 1
DETAIL D
SCALE 2 : 1
IF TOEKICK IS HIGHER THAN 4" USE SIDE CUTTER TO 1.
CUT UNREQUIRED VANES FROM DOTTOM
DRILL HOLES THROUGH DIMPLES
2.
USE PROVIDED SCREWS TO FIX GRILL TO 3.
MATCHING HOLES ON PLASTIC PARTS
B
4
Removing top toe kick grille
Toe kick grilles and filter (all models)
Your refrigerator is fitted with a toe kick
grille and filter to protect the internal
working components. We recommend
cleaning the grille and filter in conjunction
with changing your water filter cartridge
(every 6months).

To maximize operating efficiency, keep
ventilation openings clear of obstructions
by regularly vacuuming the flooring in front
of your appliance.

More frequent cleaning may be necessary
for dusty homes or those with pets
sheddinghair.
To clean the top toe kick grille and filter
(RS90, RS91, RS36A80 and RS36W80
models only):
1
Remove the air flow divider by pulling
towards you (A).
2
To remove the top toe kick grille, insert
fingers into the left and right square
openings on the grille. Pull towards you(B).
3
To remove toe kick filter, insert fingers into
the left and right square openings on the
filter. Pull towards you (C).
4
Clean both components with liquid
detergent dissolved in warm water and a
soft lint-free cloth.
5
Rinse with clean water and dry with a
clean, lint-free cloth.
To replace toe kick filter and grille:
1
To replace toe kick filter, align filter tabs
onto the rails and push to the rear until it
clips securely.
2
To replace top toe kick grille, align securing
hooks then firmly push grille onto product
until it clips securely (D).
3
To replace air flow divider, align the divider
underneath the grille tabs indicator and
clip onto the vanes of the bottom grille(E).
D
Removing toe kick filter
C
A
DETAIL A
SCALE 1 : 1
DETAIL D
SCALE 2 : 1
IF TOEKICK IS HIGHER THAN 4" USE SIDE CUTTER TO 1.
CUT UNREQUIRED VANES FROM DOTTOM
DRILL HOLES THROUGH DIMPLES
2.
USE PROVIDED SCREWS TO FIX GRILL TO 3.
MATCHING HOLES ON PLASTIC PARTS
Removing air flow divider