Installation Guide

20
IMPORTANT!
●
The water connection instructions below are intended only for
theprofessional installer.
●
The appliance comes with a pre-connected plastic water tubing.
●
Water fittings are not supplied and must be purchased separately.
●
Ensure the appliance isconnected to its own isolating switch.
●
Ensure there is enough tubing for the water connection and to pull
theappliance outforservice, if required.
●
Flush water through the hose prior to connection to the appliance
toremoveany debris in the hose.
!3 WATER SUPPLY CONNECTION
Connect to water supply (Ice and Water models only)
1
Move the appliance in front of the cabinetry close enough that you still have
access behind for power and waterconnections (A).
A
D
2
Assemble the water fittings components onto the free end of the water
tubing.
C
Final water tube connection
Insert tube Compression
sleeve
Compression
nut
Water tubing
3
Secure connection by inserting a locking key (B) to the water fittings and
water tubing. Pull gently to ensure it is locked in (C).
4
Connect the water tap adaptor to a water tap (D).
– Flush water through the hose prior to connection to the appliance
toremove any debris in the hose.
5
Turn on the water tap and check all connection are dry and free of drips.
B
Miscellaneous items
(MI) pack
Collet locking clip
(1)
Water fittings kit
1/4" (6mm) plastic
tubing (1)
1/4"(6mm) Compression
nut (1)
1/4"(6mm) Compression
sleeve (1)
1/4" (6mm) Tube insert
(1)