Installation Guide
ManualsBrandsFisher & Paykel ManualsCooking Appliances48 Inch Freestanding Smart Dual Fuel Range with 5 Sealed Dual Flow Burners™, Dual Oven, 6.9 cu. ft. Total Oven Capacity, Continuous Grates, Wi-Fi Enabled, Pyrolytic Self-Clean, Griddle, 15 Oven Functions, Touchscreen Interface, Halo-Illuminated Dials, Ful
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Product dimensions – 30" models
- Product dimensions – 36" models
- Product dimensions – 48" models
- Clearance dimensions – all models
- Backguard considerations
- Ventilation requirements
- Unpacking the range
- Removing and refitting the oven door(s)
- Location of electrical and gas supply
- Electrical connection
- Gas connection
- Toe kick installation
- Levelling the range
- Cooktop burners
- Leak testing
- Installing the anti-tip bracket
- Final checklist
3
WARNING!
Electric Shock Hazard
Failure to follow this advice may result in
electrical shock or death.
• Before carrying out any work on the electrical
section of the appliance, it must be disconnected
from the mains electricitysupply.
• Connection to a good ground wiring system is
absolutely essential and mandatory.
• Alterations to the domestic wiring system must
only be made by a qualified electrician
!
WARNING!
Cut Hazard
Failure to use caution could result in injury.
• Take care: some edges are sharp.
WARNING!
420-630 lb
190-285 kg
Extremely Heavy
Failure to follow this advice may result in
damage or personalinjury.
• Proper equipment and adequate manpower must
be used in moving the range to avoid personal
injury or damage to the unit or the floor. The unit
is heavy and rests on adjustable steellegs.
SAFETY AND WARNINGS
WARNING!
Failure to follow this advice may result in
death or seriousburns to children of adults.
• To reduce the risk of tipping the appliance, the
appliance must be secured by properly installed
anti-tip device packed with the appliance.
• A child or adult can tip the range and be killed.
• Install the anti-tip device to the structure by
fastening the supplied bracket to the floor and
wall following the instructions for installing the
anti-tip device.
• Engage the anti-tip device.
• Re-engage the anti-tip device if the range
ismoved.