Installation Guide
ManualsBrandsFisher & Paykel ManualsCooking Appliances48 Inch Freestanding Smart Dual Fuel Range with 5 Sealed Dual Flow Burners™, Dual Oven, 6.9 cu. ft. Total Oven Capacity, Continuous Grates, Wi-Fi Enabled, Pyrolytic Self-Clean, Griddle, 15 Oven Functions, Touchscreen Interface, Halo-Illuminated Dials, Ful
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Product dimensions – 30" models
- Product dimensions – 36" models
- Product dimensions – 48" models
- Clearance dimensions – all models
- Backguard considerations
- Ventilation requirements
- Unpacking the range
- Removing and refitting the oven door(s)
- Location of electrical and gas supply
- Electrical connection
- Gas connection
- Toe kick installation
- Levelling the range
- Cooktop burners
- Leak testing
- Installing the anti-tip bracket
- Final checklist
18
1 1
2 2
3
Replace both sets of covers,
ensuring each set locks
together.
Insert both foot covers into the
toe kick ensuring the long hem
edge is facing the inside of the
product.
Align the toe kick with side
panels of the range.
Clip into place by rotating and
pushing the bracket down over
the range structure.
Check toe kick is flush with the
range and secure using 2 screws.
To expose both front feet,
slide the interlocking foot
covers out of the way.
Turn feet to adjust the height.
Long hem edge
z
Ensure the doors and toe kick panel are securely in place, if removed previously.
z
Ensure any backguard is fitted prior to final positioning. Refer to page 10 for the
backguard options.
z
Ensure all electrical and gas connections have been done as per instructions.
z
Ensure flooring and adjacent cabinetry are also level. To achieve a flush fit of the range to
adjoining countertops, it will be necessary to have level cabinets (front to back, and left
to right across opening of the range).
TOE KICK INSTALLATION LEVELLING THE RANGE
PRIOR TO FINAL POSITIONING
FRONT VIEW
FRONT VIEW
CROSS SECTION PROFILE VIEW PROFILE VIEW
PROFILE VIEW