User Manual

69
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
During SELF CLEAN, the
oven is louder than usual.
This is normal: the oven’s cooling
fans operate at their highest speed.
The screen shows no time
remaining but the oven
door will not open.
The oven door is locked because
the oven is still too hot to be used
for cooking.
Wait until
SELF CLEAN has finished.
If you cancelled a cycle part way
through, the oven
still needs to cool down before it
can be used. The oven door will
automatically unlock.
I have cancelled
SELF
CLEAN
but cannot use
the oven:
• the door will not open
• the screen is still
counting down or
showing no time
remaining
• the controls are
unresponsive
This is normal.
If the oven is still too hot to be
used for cooking the door will stay
locked until it has cooled down.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Depending on when the clean
cycle was cancelled, the cool-down
may take up to 45 minutes.
The oven screen shows A2
or A3.
See 'Alert codes' for instructions. Follow the instructions on
the screen.
There is a power cut
during
SELF CLEAN.
Power cut. The heating elements are disabled
while the door is open.
The door will remain locked
until the oven has cooled to a
safe temperature.
Excessive smoking and/
or flames inside the oven
during a CLEAN cycle.
Combustible material (eg wooden
board or utensil) or excessive food
soils left in the oven.
Follow the instructions under ‘Self
Clean’ Do not disconnect the range
from the power supply at the
circuit breaker. The cooling fan is
needed to cool the range.
Brief glowing inside the
oven during
SELF CLEAN.
Heavy soiling is being removed. This is normal and requires
no action.
The dial halos on
the secondary oven
flash white.
SELF CLEAN is running in the
main oven.
Wait until the SELF CLEAN cycle has
finished or follow the instructions
in 'Using Self Clean'.
The oven door won’t open The door is locked because
SELF
CLEAN
cycle is underway or the
oven has not yet cooled.
See instructions in 'Using Self
Clean'.
Self Clean