Installation guide

ELECTRICAL CONNECTION
PAGE 6 OF 8
0,9
This oven is manufactured with white (neutral) power supply wire and a cabinet-connected green grounding wire taped together.
Feedthe oven cablethrough the openingin the cabinet. Makethe electrical connectionfollowing the steps appropriatefor your installation,
1. Disconnectthe powersupply.
------_WARNING : Failureto disconnectthe power supplymayresultin deathor injury.
2. Removethe junction box cover.
3. Connectthe ovencableto the junction box throughthe U.L-listed conduit connector,
4. Connectthe two blackwires together with twist-on connectors,
5. Connectthe two redwires togetherwith twist-on connectors.
6. Connectelectrical connectionaccordingto local codesand ordinances,
If localcodesPERMITconnectingcabinet-groundingconductorto neutralwhite wire in
the junctionbox:
7. Connectthe factory-crimpedgreenandwhite ovencable wires to the
neutral (white) wire inthe junction box,
8. Replacethe junction box cover,
If localcodesDONOTPERMITconnectingcabinet-groundingconductorto neutral
(white) wire in junctionbox:
7. Separatethe factory-crimpedgreenandwhite oven cablewires,
8. Connectwhite ovencablewire to neutral(white) wire in junction box.
9. Connectthe greengroundingoven cable wire to a groundedwire in the junction box,
10. Replacethe junction boxcover.
Cable from
JrlnuCt_i n box po_ _pply wires
grounding oven wires
- factory crimped _ " " - ! nector
junction box
red wires
Cable from
po_ upply
white wires
0,9 If connectingto a four-wire electrical system:
7. Separategreenand white oven cable wires.
8. Connectwhite ovencable wire to neutral(white) wire in junction box.
9. Connectthe greengroundingoven cable wire to the (green)groundingwire inthe junction box.
Do not connectgreen groundingwire to neutral (white) wire in junction box,
18. Replacethe junction box cover,
green grounding
wires- oven wire
factory crimped
U,L. - listed
conduit connector