Installation Guide

8
FITTING THE OPTIONAL BACKGUARD LOCATION OF ELECTRICAL SUPPLY
Backguard (supplied with some models only)
z
Remove the screws and spacers on the rear of the cooktop.
z
Assemble the backguard as shown and fix onto the back of the cooker using
the same screws and spacers.
z
Fix the backguard onto the cooker using the screws provided.
Final position of cooker
against wall
Left side
of cavity
Floor
Electricity
B
AA
C
D
SUPPLY AREA DIMENSIONS MM
A Distance from either edge of Cooker to supply area 19
B Height of electrical supply area (from floor)*
210–260
C Width of electrical supply areas 859
D Depth of supply area
(ie maximum protrusion of electrical connection from wall)
74
*Depending on adjustment of feet.