Installation Guide
13
4 Fit the lock pin through the bracket as shown
5 Insert the drawer guides onto the sliding runners on either side of the cooker interior.
z
Ensure they are correctly lined up on both sides of the drawer.
6 Gently close the drawer completely. The safety catches will automatically lock into place.
2 Fit the lock pin through the bracket as shown.
3 Close the storage compartment door.
INSTALLING THE ANTI-TIP BRACKET
1 Open the storage compartment door.
To remove the storage/warming drawer
1 Open the storage/warming drawer completely.
2 Move down the lever of left guide A and up the lever of right guide B.
3 Remove the drawer holding the levers in the same position.
IMPORTANT
z
Do not remove storage/warming drawer while hot or during operation.
z
Be sure storage/warming drawer is empty before removing.
z
Always position your hand below the front panel to open/close the drawer.
A
B
Fitting the lock pin (models with a storage/warming drawer)
The anti-tip bracket is accessible by removing the storage/warmer drawer,
andispositionedon the rear right side of the cooker.
Fitting the lock pin (models with a storage compartment)
The anti-tip bracket is accessible by opening the storage compartment door,
andispositioned on the rear right side of the cooker.
bracket mounted
to rear wall
cooker
back
lock pin
bracket mounted
to rear wall
cooker
back
lock pin