User Guide
Table Of Contents
- User Guide
- Contents
- Safety and warnings
- Introduction
- First use
- Cooking guide
- Oven functions
- Cooking charts
- Setting the timer
- Auto Cook
- Using your induction cooktop
- Using your cooktop’s special features
- Choosing the right cookware
- Cooking guidelines
- Using the storage compartment
- Care and cleaning
- Troubleshooting
- Alert codes
- Warranty and service
11
FIRST USE
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
12 05
0 00
Setting the clock
When your oven is first turned on, or after a power cut, the display will flash. You will need
to set the clock in order to use the oven.
1 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
to enter the clock display. 2 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
and
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
to set the time.