Installation Guide

8
FITTING THE OPTIONAL BACKGUARD LOCATION OF ELECTRICAL SUPPLY
Backguard
z
Remove the screws and spacers on the rear of the cooktop.
z
Assemble the backguard as shown and fix onto the back of the
cooker using the same screws and spacers.
z
Fix the backguard onto the cooker using the screws provided.
f
Final position of cooker
against wall
Left side
of cavity
Floor
Gas
Electricity and Gas
C
E
D
B
AA
SUPPLY AREA DIMENSIONS
MM
A Distance from either edge of Range to supply area 19
B Width of electrical area
860
C Width of gas only supply area 79
D Height of electrical supply area* 210–260
E Height of gas supply area* 700–750
F Depth of supply area (ie maximum protrusion of gas
and electrical connection from wall) 74
*Depending on adjustment of feet.