User Manual

50
CARE AND CLEANING
A
B
Replacing the wok burner
●
Carefully replace the burner parts as per the following illustrations.
●
Fit the flame spreader to the housing as shown below. Make sure the burner is not able
to rotate.
Check that:
●
the ignitor is always clean to ensure trouble-free sparking.
●
the probe is always clean to ensure correct operation of the safety valves.
●
Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and
methylated spirits.
Correct positioning of
flame spreader
Correct positioning of
cap and ring
Ignitor
Incorrect and correct positioning
of cap and ring
Ring
Cap
Probe
Flame spreader