User Guide

33
Control dials
The dials control the flow of gas through the valve.
GRAPHICS LOCATION
1 Identify the dial of the burner you want to use.
2 From the O (OFF) position push the dial in and turn it anticlockwise to HI.
z
The ignitors on all the burners will spark.
3 After the burner has lit keep the dial held in for a few more seconds before releasing.
z
Releasing the dial too soon will extinguish the flame.
Flame failure protection
Your cooktop is equipped with flame failure protection: the gas supply will automatically be
cut off to a burner that is accidentally blown out by a draught or extinguished by a spill.
USING YOUR GAS COOKTOP
GRAPHICS LOCATION
4 When the burner has lit, adjust the
flame anywhere between HI and LO.
z
Do not adjust the dial
between HI and O (OFF)
5 When you have finished cooking, turn
the dial clockwise back to O (OFF).
z
If you are using LP gas, there may be
a slight ‘extinction pop’ or flash at the
flame spreader a few seconds after
the burner has been turned off. This is
normal for LP gas.