User Guide

42
Care and cleaning
FOUR FUNCTION MODELSMODELS WITH GAS COOKTOP
WRONG
CORRECT
A
B
Replacing the oven lamp
1 Turn the power to the cooker off at the wall.
IMPORTANT!
Disconnect the cooker from the power supply befor continuing.
2
Let the oven cavity and the heating elements cool down.
3 Remove the protective cover “B”.
4 Replace the bulb “A” with a new one suitable for high temperatures (300°C) with the
following specifications: 220-240V, 50Hz and same wattage as the bulb being
replaced (check wattage stamped on the bulb).
IMPORTANT!
Never replace the bulb with bare hands; contamination from your fingers can cause
premature failure. Always use a clean cloth or gloves.
5 Refit the protective cover “B”.
6 Turn the power to the cooker back on. Set the clock.
Note: oven bulb replacement is not covered by your warranty.
Fig.41 Removing the oven lamp