Manualshelf

Use and Care Guide

ManualsBrandsFisher & Paykel ManualsSingle Oven Electric RangesContemporary Smooth Surface 4-Element 3.5-cu Ft Self-Cleaning Single-Fan Freestanding Electric Range (Stainless Steel) (Common: 30-in; Actual: 29.88-in)
51525354555657585960
51
Replacing an oven light bulb
IMPORTANT!
Use a 25W, 120V 60Hz G9 halogen bulb for replacement.
Do not use a standard light bulb in any oven, the heat will break it.
1 Allow the oven (including the lamp cover and the bulb) to cool completely.
2 Remove any shelves that may get in the way.
3 Remove the door if the lamp will be hard to reach.
4 Turn the power supply to the range off at the main fuse or circuit breaker panel. If you
don’t know how to do this, contact an electrician.
IMPORTANT!
Failure to disconnect the range from the power supply may result in death or
electrical shock.
5 Remove the lamp cover. Wear a rubber glove to improve grip if needed.
y Upper lights: wearing a rubber glove to improve grip turn the cover counter-clockwise
to unscrew.
6 Remove the faulty bulb.
7
Holding the replacement bulb in a soft cloth or tissue insert it into the socket. Do not
touch the bulb with your fingers.
8
Replace the lamp cover. Turn the cover clockwise to tighten and then back a quarter
turn.
9
Turn the power supply to the range back on at the main fuse or circuit breaker panel.
Light bulb
Upper
lamp cover
Upper
lamp cover
CARE AND CLEANING
OR30 Models