Installation Guide

E
N
L
1 (L )2
1
2
4
1
2 3
g
e
w
ith
3
llow
he
y
e
r &
n
to
45
67
UNPACK THE OVEN REMOVE THE DOOR
ELECTRICAL CONNECTION HARD WIRING THE OVEN
Rating plate
Unhook to
open cover
Unhook to open
cable clamp
We recommend that the outlet for the power supply cable is located in the right rear corner of
the cabinet cavity. This allows the power supply cable to sit inside the right rear of the oven and
prevents it being jammed between the cabinet wall and the rear of the oven.
Connecting the oven to the
mains power supply
Important!
This oven must be connected to the
mains power supply only by a suitably
qualified person.
This oven must be earthed.
Before connecting the oven to the
mains power supply, check that
the domestic wiring system is suitable
for the power drawn by the oven
(as specified on the rating plate)
the voltage corresponds to the value
given on the rating plate.
OB90 - NZ AU GB IE
220-240 V 4400 W (19.1 A)
OB90 - IT
220-240 V 3500 W (15.2 A)
(1,2) -2- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM
(1,2) -2- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM