Installation Guide

10
•
Before operating your new microwave oven make sure you read
and understand this operation manual completely.
•
Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will show
WELCOME PRESS CLEAR AND PRESS CLOCK.
2. Touch the STOP/CLEAR pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
•
Suppose you want to enter the correct time of day
12:30 (AM or PM).
PROCEDURE DISPLAY
1
2
TIMER
CLOCK
Touch TIMER/CLOCK pad
and number 2 pad.
ENTER
TIME OF
DAY
2
1 2 3 
Enter the correct time
of day by touching the
numbers in sequence.
12:30
3
TIMER
CLOCK
Touch TIMER/CLOCK pad
again.
12:30
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR
will appear in the display.
Touch the STOP/CLEAR pad and re-enter the time.
•
If the electrical power supply to your microwave
oven should be interrupted, the display will
inter-mittently show WELCOME PRESS CLEAR AND PRESS
CLOCK after the power is reinstated. If this
occurs during cooking, the program will
be erased. The time of day will also be erased.
Simply touch STOP/CLEAR pad and reset the
clock for the correct time of day.
BEFORE OPERATING
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.