Installation Guide
1
1SAFETY AND WARNINGS
!
WARNING!
Weight Hazard
The appliance is heavy. Please ensure adequate care is taken when installing 
the appliance to prevent personal injury. 
Weight of the products are:
HPB3011-4 = 36lb (17kg) 
HPB3011-6 = 36lb (17kg) 
HPB3019-6 = 46lb (21kg) 
HPB3611-6 = 41lb (19kg) 
HPB3619-6 = 51lb (23kg) 
HPB3619-12 = 68lb (31kg) 
HPB4819-12 = 77lb (35kg)
HP3019 (shell) = 29lb (13kg) 
HP3619 (shell) = 35lb (16kg) 
HP4819 (shell) = 43lb (20kg)
!
WARNING!
Electric Shock Hazard
Always disconnect the appliance from the mains power supply before 
carrying out any maintenance or repairs. 
Installation work and electrical wiring must be done by qualified person(s) 
in accordance with all applicable codes and standards, including fire-rated 
construction. Failure to do so can result in death, electric shock, fire or injury 
topersons.
IMPORTANT!
READ THE ENTIRE SET OF INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE.
Refer to the User guide for more details on safety and warnings. A copy of the installation 
instruction and user guide for this product can also be found at fisherpaykel.com.
WARNING!
For residential use only.
Use only metal ductwork to reduce the risk of fire.
Do not use flexible ducting.
CAUTION!
Ensure to duct air outside to reduce the risk of fire and to properly exhaust air. Do not vent 
exhaust air into spaces within the walls or ceilings or into attics, crawl spaces, or garages.
!
 WARNING: Chemical Burn Hazard. Keep batteries away from children.  
This product contains a lithium button/coin cell battery. If a new or used lithium button/
coin cell battery is swallowed or enters the body, it can cause severe internal burns 
and can lead to death in as little as 2 hours. Always completely secure the battery 
compartment. If the battery compartment does not close securely, stop using the product, 
remove the batteries, and keep it away from children. If you think batteries might have 
been swallowed or placed inside any part of the body, seek immediate medical attention. 
Even used cell batteries may cause injury so ensure they are kept away from children and 
disposed of properly.
2PRODUCT INFORMATION
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to 
change at any time. For current details about model and specification availability in your country, 
please go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.
Other required materials and tools:
Metal ducting 
Aluminum tape (DO NOT use duct tape)
T20 head screw driver
1/2” (12.7mm) cULus approved wiring 
conduit and connectors 
1/2” (12.7mm) cULus approved strain relief
cULus listed wire nuts
Back draft damper(s) if desired
Please read this manual carefully, and keep it after installation for future reference.
Keep all packing materials (box, pallet, straps) until the unit has been inspected.
Inspect the product to check there is no shipping damage. If any damage is detected 
contact the dealer or retailer you bought the product from to report the damage. 
Fisher & Paykel is not responsible for shipping damage.
INTEGRATED RANGE HOOD
HPB3011-4, HPB3011-6, HPB3019-6, HPB3611-6, HPB3619-6, HPB3619-12, HPB4819-12,  
HP3019 (shell), HP3619 (shell) & HP4819 (shell) models
INSTALLATION GUIDE
US CA
105305A  06.18
INTEGRATED RANGE HOOD
HPB3011-4, HPB3011-6, HPB3019-6, HPB3611-6,  
HPB3619-6, HPB3619-12, HPB4819-12,  
HP3019 (Shell), HP3619 (Shell) & HP4819 (Shell) models
HOTTE ENCASTRABLE
Modèles HPB3011-4, HPB3011-6, HPB3019-6, HPB3611-6,  
HPB3619-6, HPB3619-12, HPB4819-12,  
HP3019 (Coque), HP3619 (Coque) et HP4819 (Coque)
USER GUIDE
GUIDE D’UTILISATION
US CA
User guide and 
Installation guide
Range hood
Filters
HPB30 (2)
HPB36 (3)
HPB48 (4)
Optional accessories
Recirculation kit – Carbon filters (2)Remote control kit – Remote control (1), 
Wireless receiver (1)
Remote control 
(selected models)
¾” OD x 3/16” ID 
Flat Washer
#10-32 
Pan Head 
Pozi Drive 
Wall Plug 
#8 x 3/4”
Truss Head
Philips Drive
Self Tapping Screw
¼-20 x ½” 
Pan Head 
Philips Drive 
Machine Screw
M4 x8
Pan Head
Torx Drive
Machine Screw
#10x 3”
Countersunk
Pozidrive 
Self tapping Screw
FP Pro Hood Fasteners
Duct adapter including 5/16” (8mm) 
T20 drive screws (4)
HPB3011-6, HPB3019-6, HPB3611-6, 
HPB3619-6, have 8” (203mm) outlet
HPB3619-12, HPB4819-12, have 10” 
(254mm) outlet










