Planning Data Sheet

DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
DATA SHEET
6" Professional Downdraft Vent System
0 5 10 20
inches
36 5/16"
B
33"
f
36"
k
29 1/2"
- 43"
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
e
d
i
h
g
m
l
o n
c
j
DATUM : BENCHTOP
CLEARANCE :
VERTICAL SURFACE
CLEARANCE :
VERTICAL SURFACE
COOKTOP OVERHANG
COOKTOP
DOWNDRAFT VENT
36" DOWNDRAFT VENT
SHOWN WITH COOKTOP
NOT TO SCALE
Model no:
HD36
(refer page 2 for metric measurements)
Dimensions in
A Overall height of Downdraft (excluding mounting brackets)
29 1/2" – 43"
B Overall width of Downdraft
36 5/16"
C Overall depth of Downdraft (excluding mounting brackets)
4 1/4"
D Height of chassis below benchtop (excluding mounting brackets)
28 3/4"
E Height above benchtop
3/4" – 14 5/16"
F Width of chassis
33"
G Depth of chassis
2 1/8"
H Depth of ledge for cooktop overhang
3/8"
I Depth of projecting vent body
1 1/2"
J Depth of top trim
2"
K Width of top trim
36"
L Height of top trim
1/2"
M Height of end cap
1/4"
N Diameter of remote blower connection plate outlet
10"
O Height and width of blower connection plate box
13"
Cutout Dimensions
in
Width of cutout
33 1/2"
Depth of cutout from rear of cooktop overhang*
1 13/16"
* Refer to cooktop installation manual for cooktop dimensions and cutout
specifications.
Minimum Clearances
in
Minimum clearance to rear of cabinet or wall from cutout
min 1"
Note: Downdrafts require either an internal or external blower.
Refer to installation instructions for the blower options and their dimensions.
INDICATES CUTOUT -------------------------------------------------------
INDICATES CABINETRY DATUM -----------------------------------------
INDICATES CLEARANCES ------------------------------------------------