Installation Guide

7
Place the ducting adapter onto the
rangehood and screw it into place
using 10mm screws.
Warning: Failure to install the screws or fixing device in accordance with these instructions
may result in an electrical hazards.
Remove the filters – pull the catch
and tilt the filter downwards until it
disengages from the supports.
1
2
ELECTRICIAL REQUIREMENTS PREPARE RANGEHOOD
Before connecting the rangehood to the power supply, ensure the voltage and frequency
indicated on the rating plate match that of the installation location:
MODEL FREQUENCY (HZ) VOLTAGE (V)
HC90 50 Hz 230 V
Rating plate location