Manual

Safety and warnings
Installation instructions
READAND SAVETHESEINSTRUCTIONS°
WARNING - to reduce the risk of fire, electric shock or injury to persons,
observe the following:
Electrical Shock Hazard
[nsta[latbn work and electrical wiring must be done by qualified
person(s) in accordance with aHapplicable codes and standards,
including fire._rated construction°
Read and follow the SAFETY AND WARNINGS outlined in this User Guide
before operating this app_ianceo
Failure to do so can result in death, electric shock, fire or injury to persons°
o Sufficient air is needed for proper combustion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent back dra#ing. Follow the heating equipment
manufacturer's guideline and safety standards such as those published by the National
Fire Protection Association (NFPA),the American Bodety for Heating, Refrigeration and
Air Conditioning Engineers (tASHRA£)and local code authorities.
o Whencutting or drilling into wall or coifing, do not damage electrical wiring or other
hidden utfides.
o Ducted fans must always be vented to the outdoors°
o Useon_ymetalductwor£
o WARNING:Toreduce risk of fire and to properly exhaust air, be sure to duct air outside°
- Do not vent exhaust air into spaces within walls or ceilings or into attics crawl spaces
or garages.
Important sa@tyinstructions
WARNING: Disconnect the rangehood from power supply before servicing.
WARNING - to reduce the risk of fire, electric shock or injury to persons,
observe the following:
o Do not use this fan with any solid state speed control device°
o Use this unit oMy in the manner intended by the manufacturer. If you have questions, contact
the manufacturer. For residential use onlyo
o Before servicing or cleaning unit, switch power off at service panel and lock service panel to
prevent power from being switched on accidentat!y. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a tag to the service panel°