Manual

C eaning and maintenance
Disconnect the power before deaning or servicing°
Cleaning
£Bean the external part with a miBd, liquid detergent and avoid the use of abrasive
cleaning products.
Changing the light
1 Before changing the light make sure that the hood is disconnected from power.
2 Remove the grease filter.
s RepBace the light with a light bulb no more powerful than that specified in theTechnical
Characteristics.
4 Phce the grease filter back into position.
If the halogen tamps need replacing, they must be replaced by lamps with an atuminium
reflector, never dichroic lamps, to avoid unnecessary overheating in the tamp hotderso
Cleaning the grease filter
Depending on use, and at least once a month, the grease
filters should be disassembled (Fig.6) and cleaned in
a dishwasher or with hot soapy water. If washed in a
dishwasher they should be placed in an upright position
to prevent food remains from falling on them.
o After rinsing and drying, replace the filters by following
the steps for disassembly in reverse order.
Fig.6 Grease filters