User Guide

21
We highly recommend using liquid rinse aid regularly to get the best drying results.
Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition,
it prevents metal from tarnishing.
When to refill the rinse aid dispenser
When rinse aid level becomes low, the rinse aid
indicator on the control panel will light up to remind
you to refill the dispenser.
Adjusting the rinse aid dosage
The normal, factory-set dosage level is 5, but you
may need to adjust this to suit your water conditions.

If there is excessive foaming at the end of the wash,
reduce the dosage.

If you live in a hard water area or if dishes are wet or
streaky after drying, increase the dosage.

To adjust the rinse aid setting: see ‘User preference
settings’ for how to do this.

If you are using tablets with built-in rinse aid, we
recommend setting the rinse aid dosage level to
off(rA-).
How to refill the rinse aid dispenser
1
Pull the rinse aid dispenser cover open using the endtab.
2
Pour rinse aid into the rectangular opening, making sure
not to fill beyond theMAXmarking.
IMPORTANT!
Take care not to spill rinse aid into the dishwasher. Any spills must be wiped up to
prevent excess foaming. Failure to do so may result in a service call, which will not be
covered by warranty.
3
Close the cover, making sure it clicks shut.
USING RINSE AID
Rinse aid indicator
(on control panel)
C2, C4 Dishwasher
C6 Dishwasher
Fill opening
End tab
EN