Owner's Guide

28
USER PREFERENCE SETTINGS
You can set your oven to:
●
Display time as 12 hr or 24 hr or power save when the oven is not in use
●
Display the temperature in degrees Celsius or Fahrenheit
●
Operate with sounds on (tones and beeps) or operate quietly
●
Operate with oven lights on or off during cooking
●
Operate in Sabbath mode (see the following section ‘Sabbath Mode’)
●
Display in the following languages: US English, UK English, CA French and Spanish.
You can also use the User Preference menu to:
●
Set the time (see the section ‘Setting the Clock’ in your Quick Start guide)
●
Reset all settings to factory settings
Note: You cannot change the user preference settings when your oven is operating or
set for automatic cooking.
How to change preference settings
1 Check the oven function knob(s)
are set to OFF and that the display
shows the time of day.
Single model shown
3 Press MENU again to scroll through
the different settings.
5 Press PLUS or MINUS to scroll through
the options for that particular setting.
●
Refer to the table below for which
options are available for each setting.
4 Press PLUS to select the setting
you wish to change.
●
The right hand display will flash.
6 Press ACCEPT to confirm the
new option and exit the user
preference setting.
●
Press CANCEL to quit the user
preference menu.
2 Press and hold MENU for a few seconds
to enter the user preference menu.
●
SET TIME will be displayed.
1PM:1 5
1PM:1 5
SET TIME 1 : 1 5 pm
1:15pm
1PM:1 5
CLOCK 12h
1PM:1 5
CLOCK
24h
13:15
13:15
1PM:1 5
CLOCK 12h