Owner's Guide

26
USING THE MEAT PROBE
7 Press MENU again to scroll through the
Automatic Cooking settings to
SET PROBE.
●
oven stops at and the preset probe
temperature of 150f will show in the
display.
●
If this temperature is acceptable,
press ACCEPT to confirm.
If you would like to adjust the probe
temperature:
8 Press PLUS to edit the probe
temperature.
●
150f will flash.
9 Press PLUS and MINUS to set the
desired probe temperature.
!0 Press ACCEPT to confirm.
SET PROBE
150f
2 : 25 PM
oven stops at;
SET PROBE
175f
2 : 25 PM
oven stops at;
5 Press MENU once to enter the
Automatic Cooking menu.
2 :25 PM
ROAST
300f
2 : 25 PM
If you have not already set a function
and temperature:
●
set function will appear in the
display.
●
The function knob halo will blink
orange.
!1 Select a function and adjust the
temperature using the function and
temperature knobs
!2 Your oven is now set to automatically
turn off when meat probe reaches
the set temperature.
●
The function and the temperature
will show in the display, as well as
the current and set temperature
of the meat probe.
SET FUNCTION
2 :25 PM
Single models
Double models
ROAST
300f
PROBE: 50 SET: 175
2 : 25 PM
PROBE: 50 SET: 175
ROAST
300f
2 : 25 PM
Double ovens only:
●
The display of the oven that is active
will flash.
Select which cavity you wish to set
delayed cook for:
6APress PLUS or MINUS to scroll
between ovens.
6BPress ACCEPT to confirm.
UPPER OVEN
auto cook menu auto cook menu
LOWER OVEN
2 : 25 PM
set function