Installation Guide

4
6 CAVITY PREPARATION
IMPORTANT!
The power outlet
must be located in a
cabinet adjacent to the
dishwasher cavity.
●
Services can be located
either side of the
dishwasher.
●
Ensure that any services
hole has a minimum
diameter of 50mm.
Slide forward (2)
20-30mm, then lift off (3)
Levelling and positioning the dishwasher
●
Before sliding the dishwasher into position, adjust the feet with a spanner (4) to ensure
that the dishwasher is level and the required height (5). Take care when pushing the
product into the cavity that you do not bend the feet.
●
Do not lift the dishwasher from the door handle or top panel.
●
As you push product in, pull through hoses and cord, ensuring they don’t get kinked or
twisted (6).
●
We recommend that you adjust the feet so that the dishwasher sits securely under the
bench top so that it doesn’t tip.
Dia. 50mm
Unscrew the top
panel at the rear
either side
Preparing the product and cabinetry
The top panel may be removed to
suit underbench cavity height. See
the illustrations below.
IMPORTANT!
To prevent possible steam damage to the cabinetry, ensure
that any bare wood surrounding the dishwasher is sealed
with an oil-based paint or moisture-proof polyurethane.
1
2
4
5
6
3