Data Sheet Integrated Single DishDrawer

CUSTOM PANEL PREPARATION
600mm Integrated Single DishDrawer™
DATE: 28.05.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
DD60SI9, DD60SHI9
Dimensions
mm
a Minimum height of drawer panel*
408
B Width of drawer panel
596 - 615
C Depth of front panel
16-20
D Minimum height of ventilation gap below front panel*
2
Maximum weight of each drawer panel (including handle)
9 kg
* For 412mm cavity height and 2mm ventilation gap below drawer panel with
external venting kit installed.
Drawer panel may be extended upwards to fit taller cavity. See installation
instructions for full clearance details.
NOTE: If using External Venting Kit and venting into the toekick area,
a minimum toekick height of 100mm is required to prevent pooling of
condensation.
B
a
C
D
A
ISO VIEW PROFILE VIEW