Installation Guide

5
TOOLS AND COMPONENTS
z
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
contact the dealer or retailer you bought the product from to report the damage.
z
Fisher & Paykel is not responsible for shipping damage.
z
Product can be vented to an external wall at the rear using supplied components**. The
below accessory kits can be purchased separately to expand venting options.
z
To purchase accessory kits, visit fisherpaykel.com
PARTS SUPPLIED OPTIONAL ACCESSORY KITS
Wrench
Hex key
Crosshead
screwdriver
Router Duct tape
Silicone Cutter
COMPONENTS REQUIRED
82389: D1-C-222-89
z
1m ducting*
z
222 x 89 connector
82392: DA-219-98-150
z
Adapter
82390: E90-H-222-89
z
90° horizontal elbow
82393: DO-G-SS
z
Stainless steel grille
82236: KRCID834***
z
Recirculation kit
82391: E90-V-222-89
z
90° vertical elbow
*Reduced length illustrated | **Excluding external outlet | ***Available in New Zealand and Australia only
15° bends (4)500mm straight
ducting: 222 x 89 (1)
Side clips (4)
90° vertical elbow (2) Foam tape (1)