Installation Guide

15
2
1
Prepare the countertop
for flush installation. Use a
router to cutout the edges of
the countertop to specified
depth (6mm). Ensure all bare
edges are sealed. Refer to
'Installation considerations'.
Attach an adhesive tape
along the edges of the
routered recess.
Apply silicone in the gap between
countertop and cooktop.
Wipe off any excess silicone.
INSTALL COOKTOP – FLUSH
adhesive
3
4
Attach the four side clips
to the cooktop chassis.
Ensure the clips are
oriented correctly.
Align vertical ducting to the
elbow on the cooktop before
lowering it into the cutout.
Tape the ducting to secure.
Ducting
Elbow