Installation Guide

14
2
1
3
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the glass overhang, 5mm from
the edge of the glass.
Ensure the adhesive side facing is
down to form a continuous seal
around the cooktop.
Trim the excess sealing
material using a sharp cutter
or trimmer knife.
Take care not to damage
the benchtop.
4
Align vertical ducting to the
elbow on the cooktop before
lowering it into the cutout.
Tape the ducting to secure.
Attach the four side clips
to the cooktop chassis.
Ensure the clips are
oriented correctly.
INSTALL COOKTOP – PROUD
5
5mm
Ducting
Elbow