Data Sheet Induction Hob

Model no:
CID834DTB4
Product Clearances
mm
a Minimum clearance from side edges of cutout to nearest
combustible surface
40
B Minimum clearance from rear edge of cutout to nearest
combustible surface
50
c Minimum clearance from top of cook surface to non
combustible surface directly above cooktop
500
d Minimum clearance from cook surface to overhead cabinet not
directly above cooktop
450
E Maximum depth of overhead cabinetry
330
F Minimum clearance below cook surface to top of any appliance
or obstruction below cooktop (required for cleaning access)
421
G Minimum clearance from rear of cutout to rear of cavity for
ducting through cabinetry
28
h Minimum clearance depth for ducting
100
Ventilation Requirements
cm
Minimum ventilation gap at front of cooktop
33cm²
Minimum ventilation gap at rear of cooktop
40cm²
DATA SHEET
Induction Cooktop, 8cm, with Integrated Ventilation
INDICATES CABINETRY ---------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 22.07.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
TOP OF COUNTERTOP
DATUM:
COOKSURFACE
FRONT VIEW
PLAN VIEW
PROFILE VIEW
DEPTH OF OVERHEAD CABINETS
B
COMBUSTIBLE SURFACE
c
OVERHEAD CABINET
DIRECTLY ABOVE
d
OVERHEAD CABINET
NOT DIRECTLY ABOVE
E
F
CLEARANCE BELOW COOKTOP
COMBUSTIBLE SURFACE
B
COMBUSTIBLE
SURFACE
A
COMBUSTIBLE
SURFACE
A
DUCTING CLEARANCE
H
REAR DUCTING CLEARANCE
H