User Guide
Table Of Contents
WHAT? HOW? IMPORTANT!
Everyday soiling
on glass (fingerprints, 
marks, stains left by 
food or non-sugary 
spillovers on the glass)
1 Switch the power to the 
cooktop off at the wall.
2 Apply cooktop cleaner while 
the glass is still warm (but 
not hot!)
3 Rinse and wipe dry with a 
clean cloth or paper towel.
4 Switch the power to the 
cooktop back on at the wall.
 z
When the power to the 
cooktop is switched off, 
there will be no ‘hot surface’ 
indication but the cooking 
zone may still be hot! Take 
extreme care.
 z
Heavy-duty scourers, some 
nylon scourers and harsh/
abrasive cleaning agents may 
scratch the glass. Always 
read the label to check if your 
cleaner or scourer is suitable.
 z
Never leave cleaning residue 
on the cooktop: the glass may 
become stained.
Boilovers, melts, 
and hot sugary spills 
on the glass
1 Remove these immediately 
with a fish slice, palette 
knife or razor blade scraper 
suitable for ceramic glass 
cooktops, but beware of hot 
cooking zone surfaces.
2 Switch the power to the 
cooktop off at the wall.
3 Hold the blade or utensil at 
a 30° angle and scrape the 
soiling or spill to a cool area of 
the cooktop.
4 Clean the soiling or spill 
up with a dish cloth or 
paper towel.
5 Follow steps 2 to 4 for 
‘Everyday soiling on 
glass’ above.
 z
Remove stains left by melts 
and sugary food or spillovers 
as soon as possible. If left to 
cool on the glass, they may 
be difficult to remove or even 
permanently damage the 
glass surface.
 z
Cut hazard: when the safety 
cover is retracted, the blade in 
a scraper is razor-sharp. Use 
with extreme care and always 
store safely and out of reach 
of children.
Spillover on the touch 
controls and stainless 
steel strip
1 Switch the power to the 
cooktop off at the wall.
2 Soak up the spill.
3 Wipe the touch control area 
with a clean damp sponge 
or cloth.
4 Wipe the area completely dry 
with a paper towel.
5 Switch the power to the 
cooktop back on at the wall.
 z
The cooktop may beep and 
turn itself off, and the touch 
controls may not function 
while there is liquid on them. 
Make sure you wipe the touch 
control area dry before turning 
the cooktop back on.
CARE AND CLEANING
29










