User Guide

USING YOUR BURNER
When using your burner, you can choose to
use the inner burner only or both the inner
and outer burners as desired.
Setting both the inner and outer rings
Turn the dial to any heat setting between
MEDIUM and HIGH before releasing.
If the flame on the outer ring appears to
flutter, turn the dial towards
HIGH to stabilise.
Setting the inner ring
Turn the dial to any heat setting between
MEDIUM and LOW before releasing.
2
3
LOW MEDIUM
MEDIUM HIGH
Inner and outer burners Inner burner only
1
Push the dial down and turn counterclockwise
to the highest heat setting. Once the burner is
lit, hold the dial down for a further 3 seconds.
A clicking sound should be present when
igniting the burner. If no clicking is present,
turn the dial clockwise back to
O (OFF) and
refer to ‘Troubleshooting’.
LOW HIGH OFF
12