Use and Care Guide

7
USING YOUR COOKTOP
a
b
a
b
IMpORTANT!
Turn the burner OFF and see ‘Troubleshooting’ for what to do next if you experience
any of the following:
There’s a strong gas smell.
The flame has been blown out by a draft
or extinguished by a spill and does not
re-ignite.
There is no clicking/sparking or there is
clicking/sparking, but a burner or burners
won’t light.
The flames don’t burn all the way
around a burner, or some flames flicker.
The flame is yellow or yellow-tipped
rather than blue.
The flames are too large, small, irregular,
noisy or lift away from the burner.
Adjusting the flame on the Dual wok burner
1 Always start out on HI. Both rings of
flame will be on in the shaded setting
range.
Note: when turned all the way down, the
flame on the outer ring may appear to
come and go. If this occurs, adjust the
dial slightly back towards HI for a stable
outer ring.
2 To use the inner ring of flames only,
continue turning the dial towards LO.
Only the inner ring will be on in the
shaded setting range.
Both rings
Inner ring only
EN